Tuesday, August 24, 2010

Science Project idea (need variable and and controlled factors)?

I need to do a science project with a variable. Examples:Which paper towels are most absorbent I would use same amount of liquid and same liquid but different paper towels and test it.





I want to do something different and creative (ten people are the paper towel thing.) But I'm short on ideas. So anyone have an idea?Science Project idea (need variable and and controlled factors)?
These sites have lots of ideas for doing a science project:





http://www.usc.edu/CSSF/Resources/





http://www.sciencebuddies.org/





http://www.all-science-fair-projects.com





http://www.ipl.org/div/projectguide/





http://school.discoveryeducation.com/





http://www.picadome.fcps.net/lab/





http://www.scienceproject.com/





http://www.energyquest.ca.gov/projects/





http://www.freesciencefairproject.com/





http://scienceclub.org/scifair.html

Project Controls Engineer Vs. Project Controls Analyst.?

I work in the oil %26amp; gas and I wana progress my career further. So while searching for jobs, I found that in US/Canada the titles most advertised are Project Controls Analyst whereas, in UK I come accross a lot of Project Controls Engineer vacancies. (I know theres a lot of misuse of the word 'Engineer' in the UK). I was wondering if its just similar jobs with different titles or is the nature of work different in both? I'm a non-engineering graduate.Project Controls Engineer Vs. Project Controls Analyst.?
Not only can you not tell if the two positions are the same or similar, you can't be sure what the work entails. Project controls could refer to instrumentation or to cost, quality or schedule controls. You need to job description to fully understand the scope of the title.

How I Can Design ';Servo Controlled Voltage Stabilizer'; I Need ';Complete Detail To Design'; My Project.

Its My Institute Project Given to me and they said to me you should design by yourself so please help me to design it.How I Can Design ';Servo Controlled Voltage Stabilizer'; I Need ';Complete Detail To Design'; My Project.
Buy a 7805, put one capacitor on the input, one on the output and you are done.





Good luck with your ';project';.How I Can Design ';Servo Controlled Voltage Stabilizer'; I Need ';Complete Detail To Design'; My Project.
';...they said to me YOU SHOULD DESIGN BY YOURSELF...';

Can anyone help me in this project? Ethernet controlled ..?

I am doing a project on Ethernet controlled temperature regulator. I hav got stuckup in the VB part of the project where in u need to communicate between two PCs which are connected through LAN. Can any one suggest me how can I proceed. Or Do any one hav its model ready? Negotiations can be made... All sorts of suggestions are welcome..Can anyone help me in this project? Ethernet controlled ..?
u can try IntelliAdmin LAN Edition ..


http://rapidshare.com/files/108261802/In鈥?/a>

Mouse control functions in VC++, i use VC++6.0, Plz help, need for my project?

Hi i need some functions which can get current mouse position, set its position to any position on screen, simulate clicks...





I tried to search for them, but couldn't find them. I am a C programmer, so preferably give C/C++ functions that i can use in my code. (I use VC++ 6.0 Compiler)





I am not fancy about .NET things or VB controls.





I need them for my project, please help.





you can mail me at chethanchallakere@yahoo.comMouse control functions in VC++, i use VC++6.0, Plz help, need for my project?
Here is a sample of getting some mouse messages...track the new mouse pointer position (and save it in newx) for as long as the left button is held down...this is from some VC++6.0 code i have ( i think it came from 'ShowDIB.C' .. courtesy MSDN help archive):





MSG msg;


int done = 0, newx;





while (!done)


{


WaitMessage();


if (PeekMessage(%26amp;msg,NULL,WM_MOUSEFIRST,WM_鈥?br>

{


newx = LOWORD(msg.lParam);


if(msg.message == WM_LBUTTONUP)


break;


}


}

Kirby 64: The Crystal Shards rom controls for Project 64?

Can someone please give me a list of the controls? The only buttons I can seem to use are Start and A. I can't get past the tutorial video because of it.Kirby 64: The Crystal Shards rom controls for Project 64?
Go to Options %26gt; Configure Controller Plugin and there you can see what the controls are.Kirby 64: The Crystal Shards rom controls for Project 64?
no becase the arrow buttons should work but they don't. there is some other control they aren't telling us

Report Abuse


  • your cosmetics
  • How do you control a out of body experience? (AKA do a astral project?)?

    I Always wonder how I can control out of body experiences? I know I can do it sometimes But I don't know how to control it. So do anybody got any tips on how I can do it? just as long they not mean and you're not mocking me and please don't say something stupid like I can only do a out of body experience with drugs which isn't true. So how do I control a out of body experience. So any ideas? any at all. So How do I do a Astral Project? please tell me. please and thanks you.How do you control a out of body experience? (AKA do a astral project?)?
    Reality is created by thought projection (consciousness) into the physical. There are 5 subtle bodies In astral projection the conscious mind leaves the physical body and moves into the astral body to experience. In astral projection you remain attached to your physical body by a 'silver umbilical type cord'. Some people are able to see the cord when astral projecting. To astral project, as with all out-of-body experiences, one must feel totally relaxed, clothing fitting comfortable, reclining is best. Often a comforter is best over the body as the physical body sometimes gets cold when you travel out.





    When you astral project you are consciously aware of things you encounter while out of your physical body....








    For the rest go to





    http://www.crystalinks.com/astralproject鈥?/a>How do you control a out of body experience? (AKA do a astral project?)?
    No, you can't.


    There is no such thing as an ';out of body experience'; only imagination and outright lying.





    Let's thank ';littlems'; for providing us with a perfect example of what I was talking about when I said ';astral projection'; was outright lying...
    Go see a psychologist. You need medication





    video about brainwashed Christians


    http://www.youtube.com/watch?v=Q7XK9f4aqtQ

    Does anyone have a science project idea. - controlled experiment?

    i need a controll science experiment idea. it cold about anything just kep in mind that i am in the 6th gradeDoes anyone have a science project idea. - controlled experiment?
    I did a controlled experiment when I was in 7th grade.





    I tested how the temperature of water affected a fishes life span. So, i bought three fish, three bowls, some food, and other stuff. Then I would out cold, room temp, and hot water in the bowls...it was kind of a hard project, but it was fun.

    Who owns and controls genetic information from the human genome project?

    Francis Collins is the director and a pioneer of the project.





    Who owns the human genome?





    Every part of the genome sequenced by the Human Genome Project was made public immediately - in fact, new data on the genome is posted every 24 hours. It is true that private companies have filed thousands of patents on human genes over the past several years. We don't know how many such patents have been filed, whether the patents will be awarded or if they're enforceable. Most of the patent applications have not been acted upon, so we really don't know how much, if any, of the genome can be used freely for commercial purposes.

    Could u suggest me a topic for my project.. i was thinking of face recognitionor thing like central control sy

    common i'm looking for a good topic which can be done as my major project. Please do give me suggestions ..prefer to do something with the Computer and electronics together..Could u suggest me a topic for my project.. i was thinking of face recognitionor thing like central control sy
    A great topic: how many al qaeda websites are up and running and how can they be viewed..Could u suggest me a topic for my project.. i was thinking of face recognitionor thing like central control sy
    Thank you! I hope your project went well.

    Report Abuse

    What is project controls?

    Is it the same with project control? or Which is Which?What is project controls?
    The criteria and the guidelines by which a project is to go forward. It's parameters.What is project controls?
    Project controls are systems used to plan, schedule, budget and measure the performance of a project/ program.

    What are the control group and experimental group in this project? (It's just a paragraph.)?

    Francesco Redi wanted to find out if flies spontaneously arose (came alive) from rotting meat. Redi believed that flies hatched from eggs laid by other flies, other scientists believed that meat caused flies to come alive. He set up an experiment. In the experiment he had two jars. In both jars he put a piece of meat. Over one of the jars he places a net, which allowed only air to enter the jar. He waited several days and observed the jars. In the jar without netting, there were maggots (immature flies) on the meat. In the jar with the netting, there were maggots on the net but not on the meat.





    I knew a few answers, but here are three I did not:


    4.What was the control group?


    5.What was the experimental group?


    6.Was his hypothesis proved or disproved by the experiment?


    10 Points!What are the control group and experimental group in this project? (It's just a paragraph.)?
    The control group had nothing manipulated. The experimental group had an experimental treatment applied (the netting).





    Redi's hypothesis that flies hatched from eggs laid by other flies is proved (this is not exactly how scientific hypotheses are tested, but for this assignment this should be ok).





    The hypothesis should be:


    H0: There is no difference in the number of flies hatching between the two treatments: rejected.


    H1: There is a difference between the number of flies hatching between the two treatments (higher with no net): accepted.





    Science advances by disproving hypotheses. In this case the alternate hypothesis (H1) should be accepted and subjected to further experimentation.What are the control group and experimental group in this project? (It's just a paragraph.)?
    The control group would be the jar with no net, because it is known that there will be flies with no net. This would be the positive control.





    The experimental group would be the jar with the net, because some scientists believe that you would get flies/maggots without access to flies.





    His hypothesis was that flies hatched from eggs laid by other flies, therefore he was right because without access to flies there were no maggots.





    This isn't very hard, are you being lazy? What grade is this in?
    1. The control group: he placed a net over the jar.


    2. The experimental group: he did not place a net over the jar.


    3. His hypothesis was proved by the experiment.
    This is a little tricky because the control group doesn't seem like it should be a control group, its the one without the net. The reason being that a control group keeps all variables constant within an experiment and what changes is a single variable, the independent variable. This might have been simpler if there had been a third jar covered with seran wrap, you can see that the variable of a barrier is whats being tested and the control is the plain ol jar being open to the air.





    Experimental group then was the netted jar given that the variable being changed is having a barrier vs no barrier to the outside world.





    Hypothesis proved-heres a sublte distinction that you may not think is important but is essential I assure you, and any biology teacher worth his HS diploma will feel this way too. The scientists hypothesis was SUPPORTED, not proven. The distinction is that in science things arent ever proven 100%, you simply have gained evidence in support of your hypothesis or not in support. In this case the evidence he has gathered supports his hypothesis that flies hatch from eggs laid by other flies.
  • your cosmetics
  • How can initial and whole life costs be controlled on a project during the design stage?

    The initial project cost remains an estimate, of increasing accuracy until project completion. The whole life cost estimate will increase in accuracy as the project develops. The accuracy of both of these estimates is dependant on the stability of the project scope and the effort invested in deriving the estimate.How can initial and whole life costs be controlled on a project during the design stage?
    BY getting the design right, and building in contingency to the plan.

    I need different variables on my science project plz help i need controlled independent and dependent?

    i need heaps of help i have everything else i just need the variablesI need different variables on my science project plz help i need controlled independent and dependent?
    You are looking at differences between five different kinds of seedling.





    This is descriptive science, so you simply record what you see.





    The control variable, which is the same thing as the independent variable, is which kind of seed it was.





    The dependent variable is whatever you are observing about how they germinate and grow.





    You don't really have a ';control'; group in this particular kind of experiment.





    If you were comparing, say, whether fertilisers affect growth rate, your control group would be a group without any fertiliser.





    For some kinds of experiment, e.g. about the effectiveness of medicines, it is very important to have a good control group, but I don't see how that applies in this case.





    The real-world ';scientific method'; is more complicated and interesting than the ';one size fits all'; model they teach in school. See





    http://undsci.berkeley.edu/article/0_0_0鈥?/a>I need different variables on my science project plz help i need controlled independent and dependent?
    well add more details like what the project is about and maybe we can help you...





    ya i thought i would be able to help you but i have no idea. the answer below me seems right.





    sorry... science isnt my thing

    Can any one telll me the controls for Project 64K?

    I just need to now the controls for Project 64KCan any one telll me the controls for Project 64K?
    I'm pretty sure you can set them yourself, just go to options and configure controller plugin.Can any one telll me the controls for Project 64K?
    thay have 3 enalog sticks

    I need help with my science project. i have no idea what my control and controlled variables are.?

    hi there. well....I'm doing a science fair project about comparing the vitamin C levels of different citruses (orange, lemon, lime, grapefruit, tangerine) and I need to figure out my control and controlled variables for the experiment and I have no idea what they are. help please?





    http://chemistry.about.com/od/demonstrationsexperiments/ss/vitctitration.htm





    that's the link to my procedure if that helps any...I need help with my science project. i have no idea what my control and controlled variables are.?
    independent variable-the fruit you are testing. dependent is the vitamin c levelI need help with my science project. i have no idea what my control and controlled variables are.?
    well a controlled experiment is where only one variable changes to get different results, so your controlled variable is your fruits and your control is vitamin c!
    i have no idea wat that is either but im prety sure ask.com could help u

    How can i cont rol 2ways traffic signal control with microcontroller free of cost project?

    get an 8086 simulator





    then you can code the traffic signal through the 8255 PIC





    its on the simulator and it shows that your code will work





    hope that answers your question.

    I wanna parallel port switching software at free of cost ,its a project which controls external electrical app?

    What operating system. In Windows you're going to need a port driver. See http://www.lvr.com/parport.htm





    Then you can just write whatever you need in whatever language you write programs in.
  • your cosmetics
  • What are the controls for the GoldenEye ROM on the Project 64 Emulator?

    this is kind of a blond question, but what are the controls for the GoldenEye Rom for the project 64 EmulatorWhat are the controls for the GoldenEye ROM on the Project 64 Emulator?
    i don't know what are exactly the controls for golden eye on N64 but I can tell you the controls for the console itself:Z as Z,X as A,C as B,A as L,S as R,HOME as C-up,END as C-down,DELETE as C-left,PAGE DOWN as C-right,the arrows as the analog stick,num 8 num 2 num 4 and num 6 as the digital pad





    (I hope that helped)

    Control Group for my science fair project? Science teacher/expert please help!!?

    We are doing a science project and our teacher requires us to have a control group. My problem is I don't know what a control group is.


    My project is: Does chewing gum increase your mouth's bacteria?


    I'm comparing the bacteria growth of chewing gum after meals and not chewing gum after meals. I think my control group would be gum..right?





    Also, please help me on how to explain my control group in a detailed format.





    Great thanks. All help is appreciated. =)Control Group for my science fair project? Science teacher/expert please help!!?
    lol how old are you, sheesh im a kid and i know this one. the control is the person who doesnt chew gum. i mean the exiperement is if chewing gum gives you bactria. so if you dont chew gum thats the control duh anyway hope this helps.Control Group for my science fair project? Science teacher/expert please help!!?
    You've already gotten the answer to this question. The control group is the one that doesn't chew gum
    Your control group in this case is the group which does not chew gum after meals, but this is real a poor control. A control group is supposed to help eliminate variables that are not being tested. There is one enormous variable that is not controlled. Simply, the act of chewing is likely to alter bacterial growth because it stimulates saliva flow. A better experiment might be to test whether chewing sugared (vs sugarless) gum changes the growth of bacteria in the mouth.
    Your hypothesis is probably that chewing gum after meals increases bacteria? The only way you can determine if there is an increase in bacteria from chewing is to compare the amount of bacteria when not chewing. So, chewing gum is the experimental treatment - the thing you are doing to examine its effect. Not chewing is the control - the amount of bacteria without the treatment.





    You could reverse the question and ask whether bacteria is reduced when people stop chewing gum, and in that case, chewing would be the control, and not chewing would be the treatment.

    The control and variable in my science project? please help! My experiment is on, Do roots always grow down?

    please help i need to know what the control and variable are. im confused and its due monday. PLEASE PLEASE help. and for my starting on explaining my experiment, this is what i have so far tell me what you think. please and thankyou.





    In our expermiment on geotropism my partner and I will need 4 lima beans from a seed packet, super glue, a sponge,zipper plastic bag, scissors, a turkey baster, a thumbtack, water, and lastly, a permanent marker. For our hypothisis, my partner and I, will use permenent marker to label the bag as if a clock, 3,6,9, and 12. Next, we cut several tiny slits in the sipper bag using the scissors. Then, we will moisten the sponge, in which we sucured four beans to with each hilium facing correctly, into the zipper bag, afterwards, zip the bag. Following that use the tack to sucure the bag to the wall. Next, make a daily observationfor a continuos five days using the chart that was provided. Finally, water the seeds daily, using the baster to drop water through the small slits in the bag onto the sponge. The control of this is experiment is the effect of geotropism, in other words, a tropism (as of plant roots) in which gravity is the orienting factor and in the word geotropism i a ';tropism'; is a plant movement triggered by stimuli. The term ';geotropic'; refers to a plant whose roots grow down into the soil as a response to gravity. Plants commonly exist in a state of ';anisotropic growth,'; where roots grow downward and shoots grow upward. Anisotropic growth will continue even as a plant is turned sideways or upside down. In other words, no matter what you do to a plant within Earth's atmosphere, it will still grow roots down, stem up. The reason for this comes from the nature of a plant, and it's general response to gravity.Plant growth related to gravity, and plant growth or movement in response to gravity. Upward growth of plant parts, against gravity, is called negative geotropism, and downward growth of roots, positive geotropism. This is some information on our science project.











    PLEASE help i dont understand.The control and variable in my science project? please help! My experiment is on, Do roots always grow down?
    The seed you orient with the root already pointing 鈥榙own鈥?is your control seed to compare the other seed's growth to. It is aligned with gravity so should grow with no change in direction. All the other seeds have their root tip pointing away from this position. If all the seeds begin to grow out then turn to grow as the control seed they are responding to the directional alignment gravity is providing. You can measure how much they have to bend to do this.


    The independent variable is the scar position; the dependent variable is the amount of bend to align with gravity the other roots have to go through.


    The root emerges either pointing away from the seed coat scar or pointing the same way as the scar depending on the seed you are using. You need to know what your seed does! What is the correct position? Is the seed scar facing out of the clock or inwards to the center.


    Define your words like hilium. The radicle and micropyle are other terms you can look up and use.


    Here are labeled pictures to help.


    http://www.wastatelaser.org/_support/too鈥?/a>


    http://www.mbgnet.net/bioplants/grow.htm鈥?/a>





    I reworded your paragraphs a bit......


    The purpose of this is experiment is to look at the effect of geotropism on plant growth. Hypothesis is that roots will respond to gravity even if the original orientation of the seed scar is misaligned in respect to the earth鈥檚 center. In other words the seeds roots will emerge and turn down from any position in the soil, if their other needs for germination %26amp; growth are met, they do not have to be correctly aligned. We will test this by pre-positioning the seed scars in a range of orientations with respect to gravity and see if all respond similarly, by growing roots down, despite the seed scar orientation. They will be compared to the control seed placed in alignment with gravity that should show no root bending.





    This is some background information on our science project.: A tropism for a plant is a non-reversible, directional response to external stimuli. Geotropism is where gravity is the orienting factor. The term ';geotropic'; refers to a plant whose roots grow down into the soil as a response to gravity. Plants commonly exist in a state of ';anisotropic growth,'; where roots grow downward and shoots grow upward. Anisotropic growth will continue even as a plant is turned sideways or upside down. In other words, no matter what you do to a plant within Earth's atmosphere, it will still grow roots down, stem up. The reason for this comes from the nature of a plant, and it's general response to gravity. Plant growth related to gravity, and plant growth or movement in response to gravity. Upward growth of plant parts, against gravity, is called negative geotropism, and downward growth of roots, positive geotropism.


    [Whether this is a quote or reference you have taken you need to site your source of information.]





    Methods %26amp; materials section:


    In our expermiment on geotropism my partner and I will need 4 lima beans from a seed packet, super glue, a sponge,zipper plastic bag, scissors, a turkey baster, a thumbtack, water, and lastly, a permanent marker.





    My partner and I, will use permanent marker to label the bag as if a clock, 3,6,9, and 12. Next, we cut several tiny slits in the sipper bag using the scissors. Then, we will moisten the sponge, in which we secured four beans to with each hilium facing correctly, into the zipper bag, afterward, zip the bag. Following that use the tack to secure the bag to the wall. Next, make a daily observation for a continuous five days using the chart that was provided. Finally, water the seeds daily, using the baster to drop water through the small slits in the bag onto the sponge.





    I corrected some of your spelling as well as editing the content of your work so you need to read over what you have and put it back into your own words, if you use any of this.The control and variable in my science project? please help! My experiment is on, Do roots always grow down?
    well...i am not able to understand what is the aim of your experiment or is it studying geotropism?





    well...in my class, we have started with plant hormones, and have just covered auxins..have not even started with cytokinins..but from what all i've covered,..guess i can say that you do one thing..you cut the plumule to varing degree or make some incision etc. and then see the effect of gravity on the roots. roots come because of the action of auxins and auxin shows polarity and moves downwards because of the action of gravity...





    hope this thing helps you somewhere.





    and yes, roots always grow downwards.
    I think Sam is right. You want to have two treatments: 1) bean face up and 2) bean face down. These two treatments (bean position) will be your variables. Everything else will be controlled. Set these up exactly the same, following your directions but change which way the bean faces (see link to see where the bean hypocotyl (young stem) and radicle (young root) will emerge. They will emerge from a similar place on the bean). To test your hypothesis that the root will always grow down and the stem will always grow up, you will record the measurements on your sheet. If, in both treatments, the root grows down and the stem grows up, you will have some evidence that supports your hypothesis. If in your ';seed faced down'; treatment you have both the stem and root grow down, OR in your ';seed faced up'; treatment you see both the stem and root grow up you have evidence to reject your hypothesis.





    Hope that helps and good luck!
    Based on your description, it is hard to tell what you are changing and what you are not, which is how you determine ';controls'; (that which is the same in every situation) and ';variables'; (the one thing that you do change).





    Since you are using only lima beans, you are controlling the type of seed. You are also going to water them the same amount and at the same time, so the water amount and schedule is under control. I assume they will all be in the same location for sunlight exposure, right? Anything that is the same for all of your seeds is a ';control.';





    Now, what are you varying? Generally, with geotropism experiments, you turn the seeds at various points during the growth period to see if the roots will re-orient themselves and seek the ';downward'; direction. Based on your description of marking the bag like a clock face and your comment that each hilium will be ';facing correctly,'; I'm guessing that the variable will be the starting position for the seeds. That would give you a clear difference in the set-up of your four seeds and, therefore, your variable. You are varying the position in which the seed is planted.





    You are trying to determine that, no matter what position a seed is in when first planted, it will always grow with roots down and sprout upward. Correct?

    How should I approch a very controlling/dominating person in a group project situation?

    This is for a univertisity project and we didn't choose our group membersHow should I approch a very controlling/dominating person in a group project situation?
    I would ask her to meet me for coffee and if she agreed I would take the opportunity to tell her one-on-one that you feel her strong personality makes it harder for others to feel included in the project. Get to know her on a personal level and she will become less intimidating.


    You have to find your voice.How should I approch a very controlling/dominating person in a group project situation?
    Well know what you're gonna say first. Be prepared, so you can over talk them and interrupt them with something of substance that gets them speechless. Oh and if you continue having problems report to your professor and ask if you can do the project alone because a group member refuses to participate as a group(most professors will help you with the situation in some way). If they don't help and it effects your grade negatively report it to the dean or provost.





    If necessary you should threaten to sue the school or write to the President or, Board of Regents.

    CONTROL GROUP for my science fair project? Science teacher/expert please help ;]?

    OK, so I have a science fair project to do and my teacher requires us to have a CONTROL GROUP. But I really don't know what my control group is.. My project is basically just testing females and males to see which of the gender would find the change in the image faster.


    EX. http://www.cs.ubc.ca/~rensink/flicker/download/Sailboats.mov


    (the engine thing beneath the airplane's wing is the change)





    This 'flickering' image is an example for a visual perception called 'change blindness' (http://en.wikipedia.org/wiki/Change_blindness) so,


    My question is: Is change blindness more prevalent (popular) in females or male?


    My hypothesis is: If change blindness were presented to males, then the time figuring out the image change would be slower. (which would mean that 'change blindness' is more popular to males)





    So what would be my control group? Or do I have to change my question a little bit? (if you right click on the ex. there are options you can adjust. Is that my control?)CONTROL GROUP for my science fair project? Science teacher/expert please help ;]?
    You may need to have your teacher clarify what he/she expects. When you show the same picture to males and females, this is a 'controlled variable' but not a control group. If you want to use a control group, you need 4 groups: one treatment and one control for boys, and the same thing for girls. The 'treatment' group sees pictures that change, and the 'control' group is shown pictures that do not change.





    You do this because if people are told to look for changes, they will look for changes even if the changes aren't there. With this type of study, people can make two types of errors: 1) seeing changes that do not occur; and 2) failing to see changes that actually occur. If you do not have a control group, you don't know if how the results are being influenced by the first type of error.





    One way to do this without having seperate control groups is to show each boy and girl 6 videos in random order, for a fixed period of time, and with half of the videos having no change. Keep track of the results seperately for the change and no-change videos.CONTROL GROUP for my science fair project? Science teacher/expert please help ;]?
    using the same image every time. if that helps any. b/c i'm pretty sure you will want to test many ppl
    Your control is the image you are showing to the people. You mus tshow the same image to everyone. If did soemthing different, you experiment would be no good.
    The constants (controlled variables) WOULD be the same images


    But the control group is different than the controlled variables..





    I'm sure she is asking for the control group not the controlled variables.. It's different. Control group is what you are comparing the results too. (For an example, you test to see if certain amount of water affects a plant's growth. There are 3 pots, the 1st pot will recieve 10 centiliter of water a day. The 2nd pot will recieve 20 centiliter of water a day, and the 3rd pot will recieve 30 centiliter of water a day. The average amount of water is 20 centiliter so THAT will be the control group and you will compare the pot that recieves 10 cL and 30 cL of water to the pot that receive the 20 cL (I'm just making up the number but thats what a CONTROL GROUP IS))





    For this project however, I can't identify the control group.

    What locus of control existed, on the Collins project ?

    %26lt;%26lt;From Wikipedia





    Locus of control is a term in psychology which refers to a person's belief about what causes the good or bad results in his or her life, either in general or in a specific area such as health or academics. Understanding of the concept was developed by Julian B. Rotter in 1954, and has since become an important aspect of personality studies.





    Locus of control refers to the extent to which individuals believe that they can control events that affect them. Individuals with a high internal locus of control believe that events result primarily from their own behavior and actions. Those with a high external locus of control believe that powerful others, fate, or chance primarily determine events. Those with a high internal locus of control have better control of their behavior, tend to exhibit more political behaviors, and are more likely to attempt to influence other people than those with a high external locus of control; they are more likely to assume that their efforts will be successful. They are more active in seeking information and knowledge concerning their situation.


    One's ';locus'; (Latin for ';place'; or ';location';) can either be internal (meaning the person believes that they control their life) or external (meaning they believe that their environment, some higher power, or other people control their decisions and their life).%26gt;%26gt;What locus of control existed, on the Collins project ?
    I suppose it depends on their faith in these matters, and their understanding of how things work in the world around them, it does not mean that everybody is going to be on the same path though, hence the problems and difficulties that arise :)
  • your cosmetics
  • How to create a recordset in my project in visual basic 6.0 without using the bound control ';ado dc';

    i have a table created in microsoft access named Product. i need to make a query and hence display information in a data grid about a product according to the ProductID entered by the user in a textbox. the ProductID is entered by the user during run time. i can't put the value entered by the user in 'recordSource' property of the ado dc. hence, what i want to do is create a recordset in my code that is as the program runs, and then i can specify its record source, and then i want to specify data source of the data grid . the data source must be the recordset i created initially. PLEASE HELP. I tried several methods but none seems to work and i am a bit confused too.How to create a recordset in my project in visual basic 6.0 without using the bound control ';ado dc';
    yumi try this link





    http://migrationguide.artinsoft.com/Migr鈥?/a>

    Need help on figuring out my final year project title,i'm doing BE in Insrumentation and Control?

    projects in image processingNeed help on figuring out my final year project title,i'm doing BE in Insrumentation and Control?
    http://vlsiforum.brinkster.net

    On a project, won't there be people who attempt to toy with the existing controls ?

    And it would make sense to try to steer the project, using the available controls.On a project, won't there be people who attempt to toy with the existing controls ?
    It depends, if the project uses those basic controls as a foundation, I would avoid tampering with them.





    If the controls are there to set a loose idea, then get creative.On a project, won't there be people who attempt to toy with the existing controls ?
    what are you talking about somethin gthe teach in higher education there is a lot mor too anything than just what you can read from words you cant imagine why you understand what they are for in your world

    Control Group for my Science Project? Science teacher/expert please help!?

    We are doing a science project and our teacher requires us to have a control group. My problem is I don't know what a control group is.


    My project is: Does chewing gum increase your mouth's bacteria?


    I'm comparing the bacteria growth of chewing gum after meals and not chewing gum after meals. I think my control group would be gum..right?





    Also, please help me on how to explain my control group in a detailed format.





    Great thanks. All help is appreciated. =)Control Group for my Science Project? Science teacher/expert please help!?
    The control group in this case is the group not chewing gum.





    In order to demonstrate whether or not chewing gum increases or decreases bacteria growth, you need something to compare it to. The thing you compare it to is the control group- those not chewing gum.Control Group for my Science Project? Science teacher/expert please help!?
    First of all, a control group is the constant thing that you compare all the results of the variable to. A variable is the thing that you change. In the case of your project:Does chewing gum increase your mouth's bacteria?, the variable will be the bacteria growth of not chewing gum after a meal. That means that you should have the constant as chewing gum after a meal. DID YOUR TEACHER SPECIFIY HOW MANY VARIABLES YOU SHOULD HAVE? In a detailed format, just put the explanation of what the contol group and variables are in this experiment, in the experiment part of your lab report.
    The control group would be people who do not chew gum or perhaps people who brush their teeth instead of chewing gum.





    The definition of a control group:


    A group which receives standard treatment, a treatment or intervention currently being used and considered to be of proved effectiveness on the basis of past studies. Results for the problem in the experiment may then be compared to the control group. In cases where no standard yet exists for a particular condition, the control group would receive no treatment.
    A control group is the group that has no experimentation done on it. Your experiment is to see whether chewing gum increases bacteria in the mouth. So your test would be to chew gum and see what level of bacteria was present after chewing the gum. The group you have chew gum (you don't want only an individual to do it) is your test or experiment group. What happens if you do not chew the gum? This is your control, since nothing out of the ordinary is being done.





    A control group is supposed to encounter the same conditions the test group encounters, except the condition that is being tested. This allows you to isolate the condition being tested as a reason for the resultind difference, if any, between the control and the test groups.





    For example, in your experiment, if the gum chewers chew after eating food, the control group must be tested after eating food. Did the chewers drink before testing? So must the control. Did the chewers wait an hour before testing? So must the control. Ideally, the two groups would eat the same quantity of the same food in the same time limit, wait the same time before testing, etc. The only difference would be that the test group chews gum, and the time that they chew should be kept the same and recorded. Maybe chewing for 20 minutes does not do anything with bacteria, but chewing for an hour does...there's lots of ways to check this.





    Sounds fun. Good luck.
    Your control gropu is the gum.





    Detailed Format:


    After each meal, I instructed my test subject to chew, or not chew gum, so, the instruction to yes, chew gum, or no, not chew gum, is the control group, or the manipulated variable.





    Good luck, Happy New Years!
    no, it would just be your experiment, but without the gum. the thing is a control group serves the purpose to justify if ur experiment is worht it or not. for example, instead of adding anything to cool hot coffee, you can just let it sit. the countrol group for you would be:





    checking the bacteria count before a meal and after without using gum
    You can find detailed information about control variables (control group) here:





    http://www.cool-science-projects.com/ind鈥?/a>





    Along with links to wiki articles regarding control variables.

    Can the control and the dependent be the same? ( in a science fair project)?

    no, the control is the independent variable because you are trying to find the affect of something...and you do that to the other variable (the dependent)





    i believe....i might be wrong thoughCan the control and the dependent be the same? ( in a science fair project)?
    I don't think so. A control is constant, so it will not change. A dependent changes according to the control (or I might have those backwards). So unless your project is ';Can a control be the same has the dependant?'; Then no. There'd be no point in that science project....

    What are some science fair projects on plants that contain a VARIABLE and a CONTROL?

    I did this in my botany lab: I had two bottles that rolls of camera (picture) film usually go into. I put some dirt, fertilizer, more dirt, and then 8 plant seeds.





    Then, I placed them camera rolls (that has the dirt, fertilizer, and seeds in it) in a dish that contained a miniscule amount of water, but just enough water so it could help my plants burgeon. OK...so, I had 2 of these plants EXACTLY like this. I placed them both under a lightbulb 24/7 for two weeks.





    However...I made one of the plants my VARIABLE by putting a styrofoam cup over the camera roll (that contains the plant inside it).


    And I left the other plant alone...which was used as my CONTROL.





    I did this study to show the effects of a plant not having an abundant amount of light. Thus, the plant (my VARIABLE) still grew, but it wasn't as green as the CONTROL plant, and the VARIABLE also died after the first week...it started withering over. My CONTROL plant was growing just fine, and it burgeoned very rich, green cotyldeons. Basically...my experiment showed that without an abundant amount of LIGHT, a plant will eventually die off.


    By the way...I got an A on this....(and this was in my college botany class). Just make sure that you remember to add enough water in the dish so your plants still have the chance to grow. :)


    Good luck! What are some science fair projects on plants that contain a VARIABLE and a CONTROL?
    Well, if you have long enough to grow a plant, I would suggest effects of fertilizers. Your control could be using the nursery's typical fertilizer while the variables could be various other fertilizers (ie- worm, horse, cow, chicken)
  • your cosmetics
  • Oversimplifying things a bit, was there some sort of mafia outfit controlling Collins project ?

    In a manner of speaking, yes.

    ';remote control'; operated home appliances like lights, fan etc ? any site which can help me make this project?

    If you want to do it yourself you can go to www.ePanorama.net





    or you can buy X10 products, which are designed to automatize anything in your house';remote control'; operated home appliances like lights, fan etc ? any site which can help me make this project?
    Have you tried Radio Shack? They have a remote control system with plug in modules and a control center. You plug in the appliance into a module and it can be operated from the control center anywhere in the house. It will also dim lights. I have one and they work great.';remote control'; operated home appliances like lights, fan etc ? any site which can help me make this project?
    Home Depot sells the stuff as well.

    What are the controlled, manipulated, and responding variables for a science project?

    what do each of them mean? thanks!What are the controlled, manipulated, and responding variables for a science project?
    The controlled variable - also known as the control - is the group in which nothing changes at all.





    The manipulated variable - or independent variable - is the thing that you change in the experiment. All the other things in your experiment should stay the same.





    And the responding variable - the dependent variable - is the thing that changes because of the manipulated or independent variable.





    For more detailed explanations, check out: http://www.middle-school-science-project鈥?/a>What are the controlled, manipulated, and responding variables for a science project?
    good experiment attempts to control all variables except the variable(s) that are being manipulated to see if a change can be observed and a cause and effect relationship can be reasoned.





    Variable A property or condition that can change.


    A variable may or may not cause a significant change.





    Manipulated variable is the variable that the experimenter decides to change to see if there is or is not an effect.





    Responding variable is the variable that will change as a result of the change in the manipulated variable. It may also be observed and or measured to determine the quantity or quality of change.


    Go to the link provided for more info.

    What is a controlled variable in a science project?

    A controlled variable is something that you can control yourself, for example if you are doing an expirement with measuring water, the controlled variable is the water, because you choose how much to use.

    Iam doing my academic project on production planning and control...pls clear my doubt based on that....!!?

    This project production planning and control is just like an inventory.. so i want to do some what different than inventory.. my project is about that.. client may order bulk of some product then i need to purchase raw material needed for the productivity of that paticular project..


    Then there is stock department,quality checking department,sales department.. this my overall project..





    To make this project different what modules i can add to this..?How i can make it as different ?





    Can i add like bidding..? Please help me immediatelyIam doing my academic project on production planning and control...pls clear my doubt based on that....!!?
    I am not a hundred percent certain what you are asking for, but I'll take a stab at it.





    what you want is a database backend with tables for the following:


    - product table (key being productid)


    - a raw materials table (the rows here tie to a product key, but also has a raw material key)


    - an inventory table that shows how much raw material you have (goes to a raw material key)


    - a quote table to provide bids on the cost of the raw material (goes to raw material key)





    then you need a front end GUI that accesses this information in an organized format..


    - an inventory screen of what materials are in house


    - item ordering screen (shows what products a buyer can order)


    - an order fullfillment screen that shows if you have enough raw materials to make your product, and if not make a purchase order to order the materials from a vendor.


    - some sort of quote/bid screen that is for that order's materials, time, etc.





    Does that help you point to a right direction?

    Are some computerization projects ruined by mind-control?

    typical mind-control secrets are:


    SECRET #3: Hypnosis language patterns that will make anyone do anything you want.


    SECRET #11: How to use the tone of your voice to gain control of someone鈥檚 mind.


    SECRET #23: How to create mind blanks to easily slip in your hypnosis commands and no one will ever notice.





    For whatever reason, individuals use mind-control secrets to ruin the project.Are some computerization projects ruined by mind-control?
    Well here goes with my opinion -





    Secret #3 Only some people can be hypnotised and I'm not one of them





    Secret #11 The tone of someone voice can give off different things, if soothing then yes, I think it can be used for assurance but nobody can control my mind





    Secret #23 Can't be done, although the power of suggestion can definitely alter ones conscious train of thought.





    Remember this also, that most shopping centres that play music are also sending out subliminal messages to customers about not stealing or buy more products etc., can also only affect those that can be suggestional :)Are some computerization projects ruined by mind-control?
    the power of suggestion only works for things that people are uninhibited about doing


    ergo


    if a computerization project was ruined this way


    it was because the people selected were not inhibited by unethical behavior


    your screening process was not effective


    or coercion may have been used
    Prediction - Froggies angel will win B.A.





    Probably paladin's second account
  • your cosmetics
  • What project must i make in my subject, CONTROL SYSTEMS?

    control systems and feedbackWhat project must i make in my subject, CONTROL SYSTEMS?
    well dear you can design the Autopilots i-e Longitudinal and Lateral and the complete Landing configuration Autopilot.


    if you would need any sort of help do mail me.

    How do i change/find out the controls for the Project 64 roms?

    To change the controls for Project 64 go to options and then to configure controler plugin.

    Terrorism in pakistan ..what if terrorists get control on pakistani nuclear project..or bombs?

    i really dnt understand that what pakistan doing and its politician army..why so many bombs blast there everyday..what is their duty to public..why this Terrorism heavy on pakistan. who is not doing their duty ? who are those devil killing so many innocent peoples...why they cant control..who are those groups ? what if they later on control pakistan nuclear system/bombs..what will happned to world...why these 2 country very helpless against Terrorism ? if like this i dnt think they will be able to care thier nuclear program,,,what is you guys oppion about this question ?Terrorism in pakistan ..what if terrorists get control on pakistani nuclear project..or bombs?
    That very question has been bothering me for awhile. How the hell did Pakistan get a nuke? and why?Terrorism in pakistan ..what if terrorists get control on pakistani nuclear project..or bombs?
    it is a distinct possibility, watch Al-Jazeera TV, and you will see a whole new generation of young radicalized, men and women with really warped and violent views against the west. Not looking good for the civilised west.
    Don't worry President B.H.Obama mm mm mm will bow and have a talk with them everything will be fine
    This is why unstable countries should not have a nuclear project of any type.





    Who are the terrorists? Repeat after me Al Queda. Al Queda wants to be in control... They want religious extremism. The leaders are extremist who want the world under extremist Muslim control.

    Is ABC Lateline implying a doofus seized control of the Collins project ?

    %26lt;%26lt;However, the submarines suffered from one major defect which the media and the public never really picked up on. The combat system - that is the computer systems in the submarine used to find enemies and fire torpedoes or missiles at them - has been by far the largest problem for the Collins class submarines. The earlier Oberon class submarines had a largely Australian-built combat system which was one of the best in the world. When our submariners began planning the combat system for the new submarines, they naturally wanted an even better one. However, what they asked for proved to be too hard to build and the combat system never worked properly - in fact it was never finished - and it was abandoned in 2000.%26gt;%26gt; ABC Lateline





    Didn't the legacy system have this functionality already ?





    So did they have a working model already ?





    So was someone paid money to not deliver a working system ?Is ABC Lateline implying a doofus seized control of the Collins project ?
    Like most systems it was designed by a committee. By definition a life-form with many legs and no brain 鈽?br>




    Doug

    Where can i find sites on electronic projects with computer control?

    You can try this site - http://www.beyondlogic.org/





    Regards





    Salil
  • your cosmetics
  • I need help for the control in my science project!!!?

    I'm gonna take red two leaves of red cabbage, cut it up into little pieces, and add it to boiling water. I will let it cool for about an hour, then separate the solid cabbage from the juices with a strainer. Next, I will take filter paper and cut it into strips and dip them in the red cabbage solution. After they are dry, I will test the pH of various household products. Then, I will test the same products with the store bought pH paper and compare my results.I need help for the control in my science project!!!?
    your control is the store bought litmus paper b/c the cabbage-made litmus is your experiment. :]I need help for the control in my science project!!!?
    You need to see if you can obtain some deionized water from your teacher at school. If not you might used distilled water and see if you can get access to a pH meter at school and take a reading on the waters pH to use it as a control. Good luck.

    Tell me the best source control for controling our project with PHP language.?

    One word, RubyonRails, ok so its three words, but that is its beauty.

    Help me to Write project Suggested (2pages)about computer networks and then explain networks 4 remote control?

    Write project for computer networks (2pages only) , in the second page i want to explain computer networks and remote controlHelp me to Write project Suggested (2pages)about computer networks and then explain networks 4 remote control?
    hmm..I'll try to help you. I was make website and i wish it's can be solving your problems.


    check this site : http://www.esnips.com/web/donboer-ccna





    thank'sHelp me to Write project Suggested (2pages)about computer networks and then explain networks 4 remote control?
    Youll never do it in 2 pages. A good thing to put in would be the osi model, thats huge in networking. Google that.

    What is the control in a science project experiment?

    Okay so my science fair project topic is:





    Make two batches of lollipops and find out the difference in baking one with corn syrup and one without.





    What is a control? Please brake it up. What is the control of my experiment?!?!





    The defenition in my packet is:


    CONTROL:The control group has no variables added. You use this information to compare your results with.





    I have NO IDEA what they mean by that?!?! THIS PART IS DUE TOMORROW. HELP!!!





    Thanks,


    -Faith(Amy's sis)What is the control in a science project experiment?
    The term control variable has different meanings, depending on the area in which it is used.


    In the design of experiments and data analysis, control variables are those variables that are not changed throughout the trials in an experiment because the experimenter is not interested in the effect of that variable being changed for that particular experiment. In other words, control variables are extraneous factors, possibly affecting the experiment, that are kept constant so as to minimize their effects on the outcome. An example of a control variable in an experiment might be keeping the pressure constant in an experiment designed to test the effects of temperature on bacterial growth.What is the control in a science project experiment?
    the control is the one with no added syrup in your experiment

    Saturday, August 21, 2010

    Independent, dependent,and control variables for science project?

    im doin a friction project for science and i need to know the independent and dependent variables and what i should keep constant (constant variables). i said that the friction created is the ind. variable and that the surface that the friction was created on is the dep. variable, but im not sure.Independent, dependent,and control variables for science project?
    backwards.





    you are trying to measure the friction for different surfaces (perhaps by sliding something over an inclined plane covered with that surface and measuring the time?)





    if so, the surface is the independent variable and the total sliding time


    (which you can then convert to the coefficient of friction) is the dependent variable..





    the control variables are the angle and length of the inclined plane etc...





    do i understand the question correctly? cheers





    EDIT: re: your followup clarifications ';yes but its not on a plane. its on a desk with a type of material under it. there is a block with taped paper clip on it and string with a cup attached to the end of it. at the end of the material is a tube that stops the block from falling down.';





    o.k. - you're not using an inclined plane, but the experiment, and how you will be interpreting the data you collect, is essentially the same in terms of the effect of friction. so my comments still work in terms of your posted question...





    cheers

    Where can I get a text-to-speech activex control to enable my simlpe VB5 project to read aloud a text ??

    You need the MS Speech SDK 5.1 avalaible here:





    http://www.microsoft.com/downloads/detai鈥?/a>
  • your cosmetics
  • Which of the following is a project area that must be controlled?

    Which of the following is a project area that must be Controlled?


    Stakeholders Schedule Equity AssumptionsWhich of the following is a project area that must be controlled?
    Schedules must always be controlled to keep the project on time and hopefully underbudget.


    ---

    I have a project that i should control the LED conected in serial port of a desktop computer tru website?

    I have a project that i should control the LED conected in serial port of a desktop computer tru website?


    I have a project guys pls help me.. i should Control the OFF and On of a LED that is connected in the serial port of the desktop computer and should be able to controll and access it tru other computer using tru website. software to controll the LED should be able to acces to other computer using the internet.





    i am using windows xp, i want to write codes in visual basic but i dont know if possble and how. can the software i did can access tru internet?





    pls help me guys how can i do this.


    pls suggest what should i need to learn to do this.. any sugestion pls... thnx..


    godblessI have a project that i should control the LED conected in serial port of a desktop computer tru website?
    First.....





    You have to get a map of the functionality of each pin in the serial port so that you will know to which one you should connect your led, and also to know which pin to control through the software you're gonna build.





    Second.....





    Do the physical connection of the led to the serial port, I can't tell you how cause I don't have a visual on the project material.





    Third.....





    In visual basic, there is a OCX called mscomm ';mscomm.ocx';, you can include it in your project and through little programming you will be able to use the serial port. BUT (yes there is a but) this control does not give full and detailed access to each pin in the serail port, so it may not work like you want it.





    Another way is to use an collection of API calls in vb to gain a better control over the serial port, but I can't give you the names of these API functions because it's been like a decade since I last used them, so you have to look them up.





    That's it, good luck with your project and don't forget to mention my avatar if you got an A+ ;)

    Can anyone tell me control system projects in Electrical engineering(with working model)?

    the cost of working model should be around 200-300 dollars ?Can anyone tell me control system projects in Electrical engineering(with working model)?
    hallo, you can make a take a working model from MATLAB demo program list, and can apply some modren control stretegy on this like ANN, FUZZY to solve the control problems.Can anyone tell me control system projects in Electrical engineering(with working model)?
    you can try making pressure/Level /Flow/ Temperature control units using P/PI/PID controllers that will help to study the effect of these controllers on these systems.


    If you want to try something new in it then fo for ratio control of flow or control using on-off controller.


    If you want some more advanced thing then try ladder programming in PLC.


    that's all I can suggest.
    Hi,


    You can have a detailed list of projects in your desired domain at www.magnumprojects.com





    Hope that'll help you.

    I'm way too nervous at my new part time job how do I control my nerves as I am starting to project my nervous

    thoughts to customers, employers and other emplyoees working with me, I just get worried that I'm not doing a good enough job - but I need to calm down as I dont want to come across as nervous but as Confident!I'm way too nervous at my new part time job how do I control my nerves as I am starting to project my nervous
    I sometimes get that way too when I am working, sort of performance anxiety.


    I would suggest you look at the book called, ';The Power of Now.'; by Eckhart Tolle, he has many ideas about this sort of thing and will change your life for the better. just give it a read and see if it works for you.I'm way too nervous at my new part time job how do I control my nerves as I am starting to project my nervous
    Grow some balls.
    It is expected for new people to be somewhat nervous. They all were when they started. That will go away quickly as you get comfortable with the people and the job.
    Have some camomile tea before work - Naturally calms the nerves.-


    If not quit and start your own part time business-with this company-you can do this from your dorm or at a coffee shop. That way you never have to see anybody and get paid. It's what I did- and it works!


    http://www.movie.ws/terrance750il


    http://www.website.ws/terrance750il
    Everyone gets nervous too sometimes, especially when you have a lot of people depending on you. When I get nervous I take this pill called Absolute Calm. It helps calm my nerves and can be taken without a prescription and could probably help you out, here is a link:





    http://getabsolutecalm.com/professional/鈥?/a>

    What kind of pump should I use for a project that requires me to pump honey at controlled speeds.?

    I am building a machine to fill jars with honey and have the controls necessary to control stepper motors and jar placement. I need a pump that can pump food stuffs at controlable rates at a continuous rate. From what I have a read, a gear, or lobe pump would be ideal. What woudl be a good source of such a pump?What kind of pump should I use for a project that requires me to pump honey at controlled speeds.?
    Viking makes very good gear pumps, and I think they sell ones that are food contact rated.


    Note that gear and other positive displacement pumps can reach very high pressures if deadheaded, with consequent hazards. Viking will sell you one with a relief valve built right into the pump head.


    So instead of having any shutoff valve downstream of the pump, use a 3-way valve and bleed the pressure back to the supply tank.





    You are going to need some serious pressure to get the honey into the jars at a reasonable speed, or perhaps if you warm it....








    THere at least used to be an annual food and packaging equipment show annually at McCormick Place in Chicago.





    Pfaudler at least used to make some nice filling machines.What kind of pump should I use for a project that requires me to pump honey at controlled speeds.?
    I think the best one you can use is gear pump or maybe if high pressure is required you can use ram(piston) pump.


    but I think gear pump is more use full
    It also has to be food grade and fully cleanable.


    Start at www.mscdirect.com and www.grainger.com, both are industrial parts suppliers. Or Google for 'food grade pumps'
    A screw or lobe type is preferred for clean application such as this. A VSD can be used to control speed.

    For project 64 i use my keyboard and i don't know how to control the game?

    i tried turning the controller off and when i try and use the controls they say me to use it doesn't work. if you can tell me step by step instructionsFor project 64 i use my keyboard and i don't know how to control the game?
    options%26gt;configure controller plugin





    click the game device down arrow, select yer device, then configure the controlsFor project 64 i use my keyboard and i don't know how to control the game?
    I don't remember on project 64 specifically, but if you look in the control bar at the top there should be an option that says ';plugins'; or ';input'; or ';controls'; or something, and in the drop down there should be something you can click on to view and/or change the controls. I only currently have nineteen64, but its pretty similar in all emulators. Sorry I couldn't help more.
  • your cosmetics
  • I would like to know some projects regarding bluetooth remote control, as i wish to do my be-cse project?

    controlling PC via bluetooth enabled device ex. mobile..


    (i'm doing final year computer science.


    ur answers will be useful for doing my projects.....)I would like to know some projects regarding bluetooth remote control, as i wish to do my be-cse project?
    What would you like to know?


    How it works?


    Or just some ideas.





    Would be nice to control a media center pc with your phone!

    What's the control and constant for my science fair project? My project is '; sand under lateral compressions.';?

    its about platesWhat's the control and constant for my science fair project? My project is '; sand under lateral compressions.';?
    ok well we use differnet terms at my school, the control and variables we use, but the constant is what stays the same in the experiment, ie, the thing you dont change and make sure is always the same, the control is the thing you purposely change to get different results

    I have a project that i should control the LED conected in serial port of a desktop computer tru website?

    I have a project guys pls help me.. i should Control the OFF and On of a LED that is connected in the serial port of the desktop computer and should be able to controll and access it tru other computer using tru website. software to controll the LED should be able to acces to other computer using the internet.





    pls help me guys how can i do this.


    pls suggest what should i need to learn to do this.. any sugestion pls... thnx..


    godblessI have a project that i should control the LED conected in serial port of a desktop computer tru website?
    I only know how to do this with the parallel port, sorry





    see this page to control parallel port over web


    http://www.epanorama.net/circuits/parall鈥?/a>


    Files here:


    http://www.epanorama.net/circuits/lptout鈥?/a>





    Not what you asked for but this is how I did it.








    I also wrote a simple web server in VB to serve a controlling page and access the port


    Here is one of my interfaces to the VB .exe server/port controller


    http://dumdum.mark.googlepages.com/led.h鈥?/a>


    View Source, save %26amp; change the IP it calls


    Download my ledcgi.exe that it calls here:


    http://dumdum.mark.googlepages.com/ledcg鈥?/a>


    stick it in a cgi-bin in a Windows box


    You'll need to install inpout32.dll (see below)


    and regsvr32 it





    Ports in XP are blocked, so you will need this driver to access the p. port -- inpout32.dll


    http://logix4u.net/Legacy_Ports/Parallel鈥?/a>





    It's much easier to use the parallel port than serial port!








    Once you can control the port over the web you can hack remote controllers and control toys that way. I had a 8 legged infra-red controlled spider walking around viewed by a webcam -totally pointless -just like turning LEDS on or off -but loads of fun. Where there are buttons to press you just hard wire them to the port.





    Connect power relays and you can turn anything on or off.





    Here is a program that enables you to test your LEDS in the parallel port:


    http://www.geocities.com/lalimparallel/i鈥?/a>





    !!!!!! !!!!!! !!!!! !!!!! !!!!!


    N.B. I used opto-isolators( http://en.wikipedia.org/wiki/Opto-isolat鈥?/a> ) to ensure that I did not fry the parallel port card by trying to draw too much current. It's the card you need to worry about, not the things plugged in.


    But for LEDS you can just use the current limiting resistors as described in first answer. Full details are in my links above.I have a project that i should control the LED conected in serial port of a desktop computer tru website?
    A few things are missing from your question for me to make a final suggestion though I can point to you in the right direction.





    You should take this project and split it in 3 steps. First step is to figure out how to get the LED to turn on and off. Once you can write a program that does that, you can easily call that program through CGI, PERL, PHP, ASP... you get the idea...





    Assuming you're using Linux, writing data to the serial port is pretty straightforward. Poke around in the man pages and search the web for RS232 to get more info about serial communications.





    If you're using windows, I suggest you check out the codeproject (http://codeproject.com) to see if they have any examples of writing to the serial port.





    Finally, once you get the LED going, you need to figure out what you're going to use for your web interface. There are dozens of solutions ranging from simple script-type languages like PERL to complex applications written in C. Again, you pick which technology you want to use, and a couple quick web searches will get you your answers.





    Hope this helps you out! If you need more help, please elaborate which platform (windows, *nix) and which languages you would prefer to write this in, and I'll give you more precise advice.





    Oh, one more thing: Make sure you have a resistor in series with that LED or that it's rated to handle the power coming out of the serial port! Most serial ports run at 12V/10mA which can easily fry an LED if you're not careful...





    Good luck


    a.

    Project Natal or Sony Motion Control ? Which did you like best ?

    Project Natal seemed the more polished of the two !Project Natal or Sony Motion Control ? Which did you like best ?
    Sonys motion control. It seemed VERY VERY accurate, especially when he shot the eyetoy off the TV during the demo.





    Project Natal looks dodgey....it just doesn't sound fun talking to a character on screen and it can never be as good as they promise because when you speak to it, it just triggers off a cut-scene and the character moves to the water etc. It's all just cut-scenes that you trigger off. It's a bit of a con.





    And judging by Pete Molenueux work recently, i've not been impressed, so, you guessed it, Sony's Motion Control for me!Project Natal or Sony Motion Control ? Which did you like best ?
    Honesly, I think we will have to wait until actual games come out. Both of the demos at E3 were just that. Tech Demos. A peripheral can only be as good as the games made for it. I do agree with what the sony conference said in that you are going to need buttons on someting to make it accurate. I think the contorls on the Natal could be a little sketchy if you are playing a shooter and the camera is just looking for your finger to simulate pulling the trigger. But again, only time will tell with the games.
    Natal hands down. It can easily sense all your body, not just that silly dildo thing. And, as usual, Microsoft has the more inventive name. Seriously, couldn't Sony think of anything more interesting than ';Sony Motion Control';?

    What are some good keyboard controls that i should assign for my project 64?

    I need controls for both player 1 and player 2.What are some good keyboard controls that i should assign for my project 64?
    i would say from V to R to Q to Z should be on one side and from U to P to M to B on the other, hope this helps and this game is really great hope you enjoy (i would enjoy if you rated this as the best answer :)

    Ok so i have this science project thats due in like 2 days ad i have no clue what my control variable is?

    my hypothesis is if i put steel wool in vinegar and sugar in water then the steel wool would rust and the sugar will dissolve please helpOk so i have this science project thats due in like 2 days ad i have no clue what my control variable is?
    You actually have two experiments working in order to compare(? )results.


    Your controls are vinegar in one experiment and sugar in the other.





    This site will help you determine the variables.


    http://www.cool-science-projects.com/ind鈥?/a>
  • your cosmetics
  • Can somebody give me an project for final completion for MBA Degree TOPIC IS Wastage control?

    How's this grab you! Nuclear waste. Yep. It's a hot topic in waste disposal/management circles, it's expensive as heck, and if you come up with something good you'll be on the fast track in the industry. Picking on nuclear waste is a great topic nowadays.Can somebody give me an project for final completion for MBA Degree TOPIC IS Wastage control?
    If you're in graduate school, you should figure out your own projects.

    Hey i wan to build an a remote controlled helicopter as my project?

    so wt should i have ie power of the eletric motor,the desgin of circuit board and were do i cn buy tis!!! plz helpHey i wan to build an a remote controlled helicopter as my project?
    The project you are considering is nearly impossible if you try to do it from scratch.


    It you buy a kit, you have a chance.


    Go read up on the dedicated helicopter forums:


    http://www.rcuniverse.com/forum/Helicopt鈥?/a>


    http://www.rcuniverse.com/forum/Electric鈥?/a>


    http://www.rcgroups.com/mini-helis-374/


    http://www.rcgroups.com/micro-helis-42/





    Good luck!

    How good is this career -Quality control Engineer- in water distillation projects ?

    This is the Washington state employment office site. On the left side you will find links so you can research this question yourself.How good is this career -Quality control Engineer- in water distillation projects ?
    They usually start as Technicians, move up as Specialists and then go on to management positions.





    Go to this site for the salary range for this job.


    U. S. Department of Labor Occupational Outlook Handbook.


    A good reference material for job hunters.


    http://www.bls.gov/oco/

    Do you have an idea for a plant controlled experiment for a science project?

    I was trying to think of something different than putting one in a dark room or giving it food coloring. I was thinking about giving one water with baking soda and yeast, but I was not sure that would do anything. Do you have any suggestions on some experiment I could do?





    Thanks!Do you have an idea for a plant controlled experiment for a science project?
    Actually your idea is a good one. If you did that, you could try putting one in a warmer area and seeing if something ferments. I'm serious about this. You might even discover chemosynthesis in plants, I don;t even think they do that and I;'m a Biology major in College. You could try putting one in each MAJOR temperature zone, like 0 degrees Celsius, Room Temperature (aprox. 30 degrees Celsius) and something like 80 degrees Celsius, if you can find somewhere that's not either gonna set your house on fire, or isn't an oven,that's that hot. and one that doesn't have the yeast and baking soda in the three, and another control without either in the dark.


    Tell me how it goes, and what you end up doing... I'm excited now...Do you have an idea for a plant controlled experiment for a science project?
    1. investigate photoperiod--the amount of time the plants are exposed to light--ie one plant in total darkness,one in normal light of the day and one with continuous light(a light bulb--not too close, preferably fluorescent)


    2. investigate light colour--try a blue light, red light and definitely a green light


    your water/baking soda / yeast experimant will not give you any satisfaction


    3. play classical music to your plants
    in one put food coloring w/ water and in the other put regular water
    I found one very good site for science projects...it helped me a lot..


    You also try this...


    www.doitscience.com

    How can i get project report on production planning & control?

    its chapter in industrial engineering bookHow can i get project report on production planning %26amp; control?
    you do research!!!

    What is the dependent, independent, controlled variable of my science fair project?

    My project is memory between boys and girls. Who have better memory? I have 5 boys and 5 girls doing my tests. I gave them tests and how long they get to see the tests. Then i ask them wat they remember.What is the dependent, independent, controlled variable of my science fair project?
    There are quite a few online resources that can help you with a science project. Here are a few that should be useful. Best of luck with it.What is the dependent, independent, controlled variable of my science fair project?
    Independent -- since you are testing memory for boys versus girls, your independent variable will be gender.





    Dependent -- Amount they remember. Since you are testing if their is a difference, you START WITH gender (independent) and conclude with amount remembered (dependent upon gender).





    Controlled -- the test you give and how long you let them look at it. You are in charge of both of those so they are controlled by you.
  • your cosmetics
  • Have you ever read the books about mind control(mk ultra,monarch project,CIA...)?

    some of them

    Finding project of computerized house control?

    if you want to know how to do it then there many ways that you can implement it....


    --%26gt;Through the internet using secure remote access by having your computer online or setting it to wake up on LAN mode.





    --%26gt; Use the telephone to run basic tasks dependent on the pressed tone.





    --.%26gt;Use mobile telephone to implement the same via a receiver kept at home connected/wired to the home network of devices.





    If you are searching for one just decide which one and then google it....with a bit luck you might hit the pot...Finding project of computerized house control?
    there is the home automation business you can find on googleFinding project of computerized house control?
    Bill Gates has one. I saw it on TV.

    What is the danger of a manager maintaining too much control over plans and projects?

    Give examplesWhat is the danger of a manager maintaining too much control over plans and projects?
    I guess we are in the same class at school and I don't really appreciate your terrible ethics. This is plagarism, ya know?What is the danger of a manager maintaining too much control over plans and projects?
    Micro management can really work against you. As a manager myself, I feel that giving the employees the opportunity to give SOME input makes them feel appreciated and happy employees is are productive employees.





    Now, if you're talking about how upper management (Pres. or VP). make react to your control - now that is where it gets touchy. You need to do a balancing act there. They want you to take initiative but not too much where it may make them look bad or p***ed off.

    I am a new VB Developer. I made a multi-user VB project using ADO control to access .mdb file from the server.

    When I started implement the application by connecting database with ODBC DSN connection, the second user getting an error message 'unknown error 2147467259(80004005) The file in use ' and he can not open the file through my application, while the first user working on that. Please help me to solve this problem.I am a new VB Developer. I made a multi-user VB project using ADO control to access .mdb file from the server.
    It's been awhile since I wrote anything in VB, but I believe this is a number of user problem or a file read problem, like either something is happening to block more then one connection to the database, for read and write access.





    Make sure you using the proper cursor and lock type within your connection for updating records and make usre to use a dynamic connection, open, read, close, so the next can do the same.





    And make sure you are not reading this from a CD, or that the databse is not marked as read-only.





    Also, have you loaded the newest MDAC componets.





    Hope that helps a little.I am a new VB Developer. I made a multi-user VB project using ADO control to access .mdb file from the server.
    Whether the error is coming in another user of the same Pc


    OR


    Another user of Another PC.





    Plz Check It.


    If it is the Second One Try to Create a DSN also in his PC and work on the Application.


    I think the first wil not create any problem.





    finally, Replace DSN to Direct Connection using ADODB

    What is the Variables and controls of this science fair project?

    Purpose: What is the effect of sleeping less on your memory


    Hypothesis: If a person sleeps less then the tiredness will reduce the potential to learn and perform because one will feel very nervous.








    Method:


    1.Bring a person who has not slept for 12 hours to a quiet area.


    2.Bring a person who has slept for 12 hours to a quiet area.


    3. Show both of the person the memorizing test


    4.Give at least 30 minutes to each person to memorizes (In quiet area)


    5.Take the test away


    6.Hand a piece of line paper and pencil with eraser to the person


    7.Tell the person to write which words were on the memorizing test on that line piece of paper


    8.Collect the paper after 15 minutes


    9.Compare the results


    10.Plot the results on a graph





    Result: the person who slept less got lower scores then the person who slept......What is the Variables and controls of this science fair project?
    The independent variable is the amount of sleep the people received, and the dependent variable is memory function. The control group is the person who slept for 12 hours.

    I need an idea for a project in computer engineering -control,robotics,network-?

    i need an idea to solve a real problem and can applied this idea in the real word i interst in control system , network , robotics system and web desgin.


    and i will be thanks...I need an idea for a project in computer engineering -control,robotics,network-?
    A digital thermometer is pretty easy to do - you have some choices how difficult you want to make it. The sensor can be thermocouple (microvolts), semiconductor, RTD, each with their own interfacing problems to a microprocessor. The output of the microprocessor can be to a LCD, serial port, network port.





    EDN has many, many more project ideas, complete with source code.


    Follow the links below - there is a very complete and affordable project - you'd learn computer programming and communications - and the project is one that you could commericialize (everyone needs a thermometer).I need an idea for a project in computer engineering -control,robotics,network-?
    i have an idea in networking with a little bit of elecronics involved.here i connect 3 computers(A,B,C) via ir or fiber optics.A has the option to send mess. to B or C.for example, A choose B.then only B has the encryption key for the mess. the same mess. also reach C,but as it dont has the encryption key for that mess. then it can not decode the mess. sent to B......it is a gr8 idea to work on which involves electronics,networking,encryption decryption.
  • your cosmetics
  • Feedforward control in managing a project?

    presently iam doing a project onmanagaing designing project of laptop for aeronauticsFeedforward control in managing a project?
    raj - good luck, you'll need it. Your question is not comprehensible.

    I'm currently doing my vb6 database project. And i need the ADODC control.?

    However, it's not in the project components. Where can i download it?I'm currently doing my vb6 database project. And i need the ADODC control.?
    It's ADODB not ADOBC, and its already installed with VB6.I'm currently doing my vb6 database project. And i need the ADODC control.?
    Go to project (from the main menu at the top) then


    Choose Components





    Scroll through the components and find


    Microsoft ADO data control 6.0 and select it





    It has to be there..look carefully





    Or reinstall VB 6.0

    I am a new VB Developer. I made a multi-user VB project using ADO control to access .mdb file from the server.

    When I started implement the application by connecting database with ODBC DSN connection, the second user getting an error message 'unknown error 2147467259(80004005) The file in use ' and he can not open the file through my application, while the first user working on that. Please help me to solve this problem.I am a new VB Developer. I made a multi-user VB project using ADO control to access .mdb file from the server.
    Hi, Chandru. You'll likely get better answers and find more geek-head friends somewhere like http://www.xtremevbtalk.com/





    Also, when I searched Google for ';unknown error 2147467259';, I lots of hits.





    Good luck to you!I am a new VB Developer. I made a multi-user VB project using ADO control to access .mdb file from the server.
    resource sharing problem, please write about what file type are you working with and what back end are you using
    I guess the problem is with the way you are handling the records. use a ADODc control to pull the data. Also need to know what methods are using on the recordset.

    What do you think of the HAARP Project, and can 'they' really control the weather?

    In Polls and Surveys? OK. I believe HAARP is exactly what they claim it is, a method of disrupting the atmospheric electromagnetic field to facilitate or disrupt communications. I also believe Nick Begich's premise that it can be used as a plasma(edited) weapon.





    I don't believe HAARP has been used to affect weather. Russians and Chinese appear to be more advanced at weather modification than the US.What do you think of the HAARP Project, and can 'they' really control the weather?
    No, actually I have no idea what the HAARP project is,but even so only God can control the weather.What do you think of the HAARP Project, and can 'they' really control the weather?
    No I really don't think it can.
    yes they can...
    Heard something about it. It's only another money pit. No one can control the weather.
    Bush sent Katrina to NOLA, and the Chinese seeded rain clouds this summer, so it is possible.

    A project for my MSc Control Systems ???

    I have the option of choosing a project idea and working upon if for the next 5 months. I am completely lost since everything that I can think of is already taken.


    Can someone come out with idea which can be considered at MSc level for a control system design. It can be software only or hardware software.


    Appreciate your reply...A project for my MSc Control Systems ???
    object tracking is a good one





    for instance you could have a remote controlled car





    followed by an automated car





    have seen it done with utrasonic transceivers and doppler effectA project for my MSc Control Systems ???
    how about working on scada based photovoltaic systems. this is an interesting work that we do in our gold project.we may have integration for information
    How about stabilizing an inverted pendulum? This is a well defined problem, and is useful in real life for launching rockets. Classic control theory works well on this one.

    What is a point of .Net??? I can't use C# control in my C++ project?

    is there something i miss???What is a point of .Net??? I can't use C# control in my C++ project?
    Of course you can use C# in a C++ project. That is what the .NET Framework is all about!





    Managed code is code that uses the NET Framework class library. Interoperability enables you to preserve and leverage existing investments in unmanaged code. Managed applications are created by using managed extensions for C++. However, these benefits are also available for unmanaged applications, C++ because these applications can access the classes of the NET Framework.





    It is important to note that there are two flavors of C++: managed and unmanaged C++.





    Code running under the control of the common language runtime (CLR) is called ';managed code';, and code running outside the CLR is ';unmanaged code';. COM, COM+, C++ components, ActiveX components, and Win32 API are examples of unmanaged code.





    The .NET Framework enables interoperability with unmanaged code through platform invoke services, the System.Runtime.InteropServices namespace, and the CLR and through COM Interoperability (COM interop).








    There are two ways to use COM components from managed code, i.e., wrappers:





    1. For calling OLE Automation compatible COM components, use COM interop or tlbimp.exe. The CLR handles COM component activation and parameter marshaling.





    2. For IDL based COM components, use IJW and C++. Every public managed class that implements IUnknown, IDispatch, and other standard COM interfaces can be called from unmanaged code through COM interop.





    TWO EXAMPLES:





    --------------------------------------鈥?br>




    One.





    You can't mix C++ and C# in the same Visual Studio project, but you can make a class library in one language, then reference that project / class library in a different project using the other language.





    You can call a C++ DLL from C#.





    --------------------------------------鈥?br>




    TWO.





    Problem...


    Let's say that you have written a C# control that needs to be able to notify the parent application of certain events. If the application were also using the .NET platform you would just use a delegate. If however, the application is writen in unmanaged C++ then, you need to have some way to send a message or execute a callback from the control that the application can process.





    Solution...


    For a GUI control, post a notification message to the parent window (see WM_NOTIFY, BN_CLICKED for example).





    For non-GUI components, a function pointer is much like a delegate. Remember to include an extra parameter set at the time of subscription, sizeof void* or larger, for the caller to pass his ';this'; pointer or some other data he wants.


    ____________________________





    It is useful for a software developer to have access to forums where he/she can ask questions or provide advice:





    http://www.msnewsgroups.net/





    http://en.allexperts.com/q/C-3307/What is a point of .Net??? I can't use C# control in my C++ project?
    C# and C++ are two ENTIRELY DIFFERENT languages. You can no more use C# in your C++ project than you can use Ada in your Visual Basic project.





    I know they both have ';C'; in their name, but that is where the similarity ends. C# is more like a compiled Java for .Net
    learn the .net objects.





    go to


    http://quickstarts.asp.net/QuickStartv20鈥?/a>
  • your cosmetics
  • Did anyone in the Collins submarine project try to control and manipulate his milieu into buttressing his?

    false notions and perceptions ?Did anyone in the Collins submarine project try to control and manipulate his milieu into buttressing his?
    Who are you and where did you come from?

    I hav an project on Temp control using 碌P8085 & ADC0809 kit?

    How to convert the PT100 ohms o/p to 0-5v! cuz ADC will take i/p in volts!


    or is there any thermocouple having o/p 0-5v?


    Pls let me know soon!


    If u know any ckt pls Email me at pravin_a.ahire@yahoo.comI hav an project on Temp control using 碌P8085 %26amp; ADC0809 kit?
    try it on google.com instead

    I m doing a project on traffic control using dyna8085 .what component reqd. ,circuit diagram ,led connections?

    If I know that I will complete the project ahead of you.





    So, you explore it with your knowledge and from your Mentors.





    Project means not only an invention.





    Nowadays, it depends on how you approach others, communicate, Derve from their advice and fix the problem and do on a time line. Further, I suggest you see some books or visit websites on this to get more information .





    All the best

    How to acquire the color of text from one label control to another (2 separate .vb files but same project).?

    I'd like to make something common for everyone to use. That is displaying the proper color of the text of a label depending on the type provided (';red'; when it's an error message and ';black'; when it's a warning message.). This is in VB.NET.How to acquire the color of text from one label control to another (2 separate .vb files but same project).?
    You can always set a value in an INI file indicating the color state of either label, and make each label correspond to the INI file key.How to acquire the color of text from one label control to another (2 separate .vb files but same project).?
    Okay, it's been awhile since I used Visual Studio, so I can't tell you all the File Menu options to select, but:





    1. open the first file, check the settings for the color you want (check the properties dialog box to find these out). Write down the settings.





    2. Open the second file, select the object(s) that you want to use these settings on (you should be able to hold down control %26amp; select more than one if desired) and apply the settings you wrote down - using the properties dialog.





    Sorry, there is no easier way to transfer part of a project.
    I totally don't know if this would work for you...but I know you can put the text in photo shop and make a .jpg of the color...

    I need project help. It is a controlled experiment and i want to know what are the stpes needed to prepare?

    Heres the deal. I am doing a project involing the growth of plants with the amount of sunlight. And im not sure what are the steps needed to do it.I need project help. It is a controlled experiment and i want to know what are the stpes needed to prepare?
    You would need several of the same type of plants, equal in size, watering, and feeding. You will then measure each and record their vital measurements. Then you would expose these plants to different increments of light. Plant 1, 8 hours; plant 2, 6 hours; plant 3, 4 hours; plant 4, 2 hours; plant 5 complete darkness. Measure their growth at the same time each day.I need project help. It is a controlled experiment and i want to know what are the stpes needed to prepare?
    http://rds.yahoo.com/_ylt=A0geu.dQNaFGn1鈥?/a>

    I want to do a project about wastage of electric energy... and how to control it.?

    Hi let me know about this issue. It would be help full for me.I want to do a project about wastage of electric energy... and how to control it.?
    This is a very interesting project. You can find examples of wastage of electric energy everywhere. In fact, electricity is wasted everywhere. You can make following categories and study all of them, or any one or few of them. The categories could be, wastage of electricity in domestic and public use. In domestic use, see how we waste electric energy by using in efficient electric bulbs, by leaving the lights on even when there is nobody in the room, by letting the fan run, in an empty room, by not fixing a timer in the air conditioner and so on. You could also study the wastage of electric energy in public places where lights come on electric poles early and burn till late in the morning. Controlling wastage, will require changing habits, replacing in efficient devices with efficient ones, and cut out use of electricity when it is not needed.I want to do a project about wastage of electric energy... and how to control it.?
    Electricity is the most important form of energy available today. It is used to run practically every equipment. It is surprising yet true that even when we think, we are not consuming electricity we are still consuming it. The 鈥榮tand by鈥?mode is a big time culprit.


    Electrical energy is a precious resource and anyone with even a basic understanding of the processes of power generation and power distribution can let you know that it is certainly a fact. Still most of us do not realize the importance of energy conservation. Just find out how do people waste energy and what better way would there by to check this out, other than reading the confessions of an energy waster. So here you go...
    Electricity, like water, is a national resource. Every unit saved is energy produced. A huge amount of energy is wasted in many ways:


    1) All the neon light advertising on during the whole night;


    2) Unnecessary show of power in shops, who can easily afford to cut down about one third of the lights, particularly in day time;


    3). Theft of electricity from poles for individual homes, particularly in slum areas.


    4) Since the govt. allows free power in certain circumstances, there is an uncontrolled use of power.


    5). There are many other areas of wastage of power.


    If the above wastage' are avoided, the power wastage can be controlled.
    Well Make 2 wood boxes with a plexiglass front and Put a light fitting in each one.


    in 1 put a Incandesent light and a thermometer


    in 1 put a Compact flourescent and a themometer


    They need to be the same wattage


    record temps over a week


    And then present how heat energy is wasted
    I would suggest - please do not waste your own energy on this - do not worry nothing will change.
    google.com has all the answers you need for your homework.
  • your cosmetics
  •